Commercial 7kW 11kW Type 2 Portable AC EV Charger OCPP 1.6

The portable electric car charger is part of the AC EV charger range and the best portable EV charger of XTECK is designed to be compact and lightweight, with two models, 11KW 16A and 7KW 32A. This portable EV charger features a quick-change input connector compatible with multi-country plugs and intelligent current recognition. It supports plug temperature real-time monitoring for overload and overheat protection. The output provides GB, Type 2, Type 1, and Tesla connectors. Equipped with a 1.47-inch LCD touch screen to show voltage, current, power, network status and fault codes. LED indicators display charging status. Waterproof rating up to IP65. Built-in WiFi, Bluetooth, 4G and APP control, fully supporting OCPP 1.6.

Specifications of Commercial 7kW 11kW Type 2 Portable AC EV Charger OCPP 1.6

Technical Information
StandardGBTType 2Type 1
Rated power3.5KW/7KW3.5KW/7KW3.84KW/7.6kW
Rated output current16A/32A16A/32A16A/32A
Input Voltage Range220VA ± 15% (1-phase)230VA ± 15% (1-phase)120VA ± 20% (LEVEL 1) / 240VA ± 20%(LEVEL 2)
Output Voltage Range220VA ± 15% (1-phase)230VA ± 15% (1-phase)120VA ± 20% (LEVEL 1) / 240VA ± 20%(LEVEL 2)
Charging interfaceIEC 61851、GB/T 20234、GB/T 18487-2015, GB/T 20234-2015SAE J1772
Working Frequency45/65 Hz
Networking methodNA
ProtocolOCPP1.6Optional
BluetoothNAOptional
Control modePlug and ChargeAPP control (Optional)
IP grade≥ IP65
Working Temperature-40℃~ +60℃
Working Humidity5%-95% Non-condensing
Special ProtectionUV resistance
Working altitude≤ 2000m
Operating instructionsBuzzerOn-screen display / Buzzer
Status indicationLED breathing lightOn-screen display /LED breathing light
Application ScenarioOutdoor indoor parking and charging
Weight<3.5kg
Dimension200mm x 100mm x 60mm


Features of Commercial 7kW 11kW Type 2 Portable AC EV Charger OCPP 1.6

This portable charging station supports up to single-phase 32A 7KW and three-phase 16A 11KW. The input side is equipped with a quick change connector that can adapt to plugs from different countries and has specific current recognition functions. It has a very wide range of application scenarios. The plug temperature detection function can monitor the temperature of the plug in real time to prevent various accidents caused by overload. The output side supports four types of charging interfaces: Chinese standard, European standard, American standard, and Tesla standard. It comes with a 1.47-inch LCD screen that can display network status, charging current, voltage, and power. In case of a fault, it can display fault information. Touch buttons can adjust the current and select the display language. LED lights can indicate various charging statuses. The waterproof rating can reach IP65. At the network level, it is equipped with WIFI, Bluetooth, 4G, and an app, supporting the full OCPP1.6 protocol.


✅ Multiple Protections Ensure Safe Use - Safety always comes first. Our EV car charger has built-in protections against Lightning, Current-leakage, Overcurrent, Over-heat, Under-voltage, and Over-voltage, as indicated by the LED varied flashing frequency. It will automatically power off if any abnormal situation happens in case of any damage to your car.

✅ Flame retardant material - Anti-combustion, using flame-retardant materials to prevent accidents

✅ Higher quality TPU cable - The gun wire is made of high-strength TPU material, which is more resistant to high and low temperature, corrosion resistance, and tensile performance than TPE, and the cost is also higher

✅ HIGH QUALITY - CE certified, which makes the service life longer, the internal smart chip protects your car and circuit you can use it with confidence.

✅ Weatherproof for Outdoor or Indoor Use - Waterproof grade IP65.Place and move your portable charger anywhere around your home both inside and out

✅ Safe & Secure - Our chargers have over-current protection, over-voltage protection, under-voltage protection, leakage protection, overheating protection.

✅ Professional customer service- XTECK's customer service team provides technical support and a 12-month warranty. If you are not completely satisfied, please contact us and we will solve it for you!

✅ DISPLAY SCREEN — Our charger features a real time data screen that displays relevant information such as, real-time charging amperage, actual charging voltage, total kilowatt consumption, current temperature, and other informative data values.

Products
Get in Touch. Contact an EVSE Representative Today
Our team will get back to you as soon as possible within 24 hours.
Contact Us
Get in Touch. Contact an EVSE Representative Today
Add:
No.1799, songhui Rd(w), Songjiang District, Shanghai, China, 201600
CONTACT

Let us assist you in finding the perfect EV charging solution to drive growth and profitability for your business.

XTECK is a premier electric vehicle charging station manufacturer.


Add
No.1799, songhui Rd(w), Songjiang District, Shanghai, China, 201600
Contact Us